Electrical Conduit
BlueSteel Services, LLC is a supplier of superior quality EMT, and Rigid steel conduit.BlueSteel Services, LLC EMT is manufactured with high quality hot dip galvanized flat rolled steel. The steel is then slit to width, formed and welded by the electric resistance welding process. This process provides a finished tube that is uniform in outside diameter, inside diameter, and wall thickness. The interior surface of our conduit is free from defect with a smooth welded seam.
BlueSteel Services, LLC EMT has a uniform zinc coating ensuring metal-to-metal contact and galvanic protection against corrosion. The exterior is protected by a clear lacquer coating. The interior surface is coated with primer to provide smooth continuous raceways for easy and fast wire pulling. BlueSteel Services, LLC EMT conduit has excellent ductility, providing uniform bending and cutting.
BlueSteel Services, LLC EMT is produced in standard trade sizes, from 1/2" - 4", in 10 foot (3.05 m) lengths. The bundle and master bundle quantities are per the table below. Bundles of finished EMT in sizes up to 1-1/2" are identified with color coded tape for easy size identification.
BlueSteel Services, LLC EMT is manufactured in accordance with the latest edition of the following:
- American National Standard for Rigid Steel EMT (ANSI® C80.3)
- Underwriters Laboratories Standard for EMT-Steel
- National Electric Code® 2002 Article 358 (1999 NEC® Article 348
Rigid Conduit
BlueSteel Services, LLC Rigid conduit is manufactured from high-strength steel, and produced by the electric resistance welding process. The finished conduit is uniform in outside and inside diameter, as well as wall thickness. The interior surface is smooth and free of defect. BlueSteel Services, LLC Rigid is hot dipped galvanized inside and outside, so that metal-to-metal contact and galvanic protection against corrosion are provided. Our Rigid conduit is top coated with a clear lacquer coating to inhibit white rust and increase corrosion resistance. The interior surface provides a smooth continuous raceway for easy wire pulling. BlueSteel Services, LLC conduit's ductility provides easy bending, cutting, and threading in the field.BlueSteel Services LLC Rigid conduit is produced in standard trade sizes, from 1/2"- 6" in 10 foot BlueSteel Services LLC (3.05 m) lengths, including the coupling. Rigid conduit is threaded on both ends, with a coupling attached to one end and a color coded tread protector to the other. The thread pitch corresponds with the American National Standard for pipe threads, general purpose (Inch), ANSI/ ASME B1.20.1. The taper of threads is 3/4 inch per foot (1 in 16). Threads are protected after cutting by an application of molten zinc.
BlueSteel Services LLC Rigid conduit is manufactured in accordance with the latest edition of the following:
- American National Standards Institute (ANSI®)
- American National Standard for Rigid Steel Tubing (ANSI® C80.1)
- Underwriters Laboratories Standard for Rigid Steel Tubing
- National Electric Code® 2008 Article 344 (1999 NEC Article 346)